
post-move utility setup checklist matters for most readers planning this. Setting up utilities after moving requires coordination between multiple providers and urgent action on a fixed timeline. Most people delay this work by a day or two, only to find themselves without heat, hot water, or internet during the transition. A utility setup checklist for electricity, gas, and internet works best when you tackle each one in sequence, with clear priority tasks and no improvisation. utility setup checklist canada. Bravos Moving can take care of this if you would rather not do it yourself.

Who this checklist is for
This applies to anyone moving into a new residential space in Ontario—renters, homeowners, and owners of condominiums alike. If you’re inheriting utilities that the previous occupant already set up, you still need to contact providers to transfer accounts into your name. If you’re renting, your landlord may have certain utilities included, but you’re responsible for confirming this in writing before moving day and for any utilities that are your responsibility.
Electricity setup: first 24 hours

Electricity is the first priority because nearly everything else depends on it. Contact Hydro One (or your local electricity distributor) on the day you move in, or the business day immediately after if you move on a weekend. Have your new address, move-in date, and the previous account holder’s name ready.
Call the customer service line or use their online portal to request a transfer. If the account is already active under the previous tenant’s name, ask for a final meter reading and request the account be transferred to you. If the meter has been disconnected, request reconnection. This process typically takes three to five business days, though Hydro One prioritizes reconnections.
During the call, verify the account number on the meter or electrical panel and confirm the service address exactly as it appears on your lease or property documents. Mismatched addresses are the leading reason for service delays. Ask whether there are any deposits required for new customers or if payment plans are available. Many distributors waive deposits for customers with a good credit history.
Gas setup: second priority
Gas service requires a technician visit for safety inspections and meter access. Contact your gas provider (typically Enbridge in Ontario) within 24 hours but expect the appointment three to seven business days later. You cannot safely use gas appliances until the account is transferred and the meter is activated.
When you call, have the same information ready: new address, move-in date, and the previous account holder’s name. The provider will schedule a meter inspection and activation appointment at a time you must be home to provide access. Confirm the appointment date and time explicitly. Missing it means another week.
Before the technician arrives, locate your gas meter and ensure it’s accessible. Confirm the address on the meter matches your account information. If you have a gas fireplace, water heater, or furnace, test them only after the meter has been activated and the technician has cleared the appliances for use. Using gas appliances before official activation is a serious safety hazard.
Internet setup: plan simultaneously, install last
Internet installation timelines vary dramatically depending on your provider and whether the line is already active at your address. Contact your internet service provider on the day you move in and request the earliest available installation appointment, typically five to ten business days out during regular seasons.
Provide your new address and confirm whether service is available at that location. Some addresses have limited provider options or require additional infrastructure work that delays installation by weeks. Ask the provider whether the line is already active or requires a technician to run new cable. If the previous occupant’s service is still active, the provider may allow you to take over the existing line without a technician visit, reducing the timeline to one or two business days.
Confirm whether the installation fee is waived for account transfers or new customers, and ask what modem or router hardware is included. Some providers charge rental fees for equipment. If installation is delayed beyond your move-in date, ask about temporary hotspot options or mobile data support from the provider.
Renting vs. owning: utility responsibility differences
Renters must verify which utilities are included in rent or the lease agreement before signing. Landlords in Ontario are responsible for providing essential services (heat, water, electricity for common areas) but may pass gas, internet, and cable costs to tenants depending on the lease terms. Request written confirmation of which utilities you’re responsible for and what the previous tenant paid, since verbal agreements often lead to disputes.
Homeowners are responsible for all utilities without exception. If you purchased the property, contact utilities early in the closing timeline so setup can begin immediately after closing. Some utility companies allow you to request setup several days before moving, so service is active when you arrive.
Documents and information you need ready
Before calling any provider, gather your new address (exactly as it appears on your deed, lease, or purchase agreement), the move-in date, your phone number, the previous account holder’s name, and your social insurance number for new account applications. Some providers may request proof of occupancy, so have a copy of your lease, purchase agreement, or property tax notice available.
If you’re setting up utilities in a condo or apartment, have your unit number, building address, and the building manager’s contact information ready. High-rise buildings sometimes require coordination with building management before utilities can be activated.
Avoiding delays between providers
Contact all three—electricity, gas, and internet—on the same day, even though installation timelines are staggered. This ensures gas service isn’t delayed by an electricity setup that takes longer than expected.
Use a tracking spreadsheet to record the date you called each provider, your confirmation number, the appointment date, and the expected activation date. Follow up with each provider 48 hours before the scheduled appointment to confirm it hasn’t been rescheduled.
If a provider misses a scheduled appointment or delays without notice, call immediately and escalate to the manager on duty. Utility companies have penalties for missed appointments and may offer credits to your account if they fail to show.
After activation
Verify the meter readings match what the provider recorded. A mismatch indicates a potential billing error or meter malfunction. For electricity and gas, photograph your meter on the first day of your account and note the reading. This protects you if there’s a dispute about consumption during your first billing cycle.
Set a calendar reminder to change your password on the utility provider’s online accounts. Most come with temporary login credentials that should be updated immediately.
Review the terms of your electricity and gas accounts during the first few days. Some providers offer variable or fixed-rate options, and you may have locked into an unfavorable rate without realizing it. If you’re unhappy with the rate, ask about switching options within the first 30 days of the account opening.
If setup slips past 48 hours
If you couldn’t contact a provider before 48 hours elapsed—common during peak moving season or if you moved late in the week—call immediately. The delay doesn’t penalize you, but each day you wait pushes installation further out.
If the previous owner’s or tenant’s account is still active, contact the utility company and request an emergency transfer into your name. The provider can transfer service immediately, though you may inherit a small portion of any unpaid balance. Confirm the previous account balance before accepting the transfer.
If a utility provider delays activation beyond one week, ask about portable alternatives while you wait. Some internet providers offer mobile hotspot devices during installation delays. For heat during cold months, space heaters are a temporary solution, though they’re expensive to run. Document any service failures for potential complaints if delays cause hardship.
When to call for professional help
If you’re managing a complex move—coordinating multiple properties, relocating a business alongside a residential move, or handling a move while you’re out of province—a professional moving coordinator can manage utility setup calls and timelines on your behalf. They maintain tracking records, follow up on appointments, and escalate issues before they become problems. For residential moves that require coordination beyond packing and logistics, this service saves time and reduces the stress of juggling multiple provider schedules.
Verify setup completion before your first bill
Five to seven days after your electricity and gas meters are activated, log into your utility accounts online to confirm the account transfer is complete and billing has started. If the account is still under the previous tenant’s or owner’s name, contact customer service immediately to correct it.
For internet, run a speed test once installation is complete to verify you’re receiving the advertised speeds. If you’re significantly below the promised speed, contact the provider’s technical support within the first 30 days. Many have guarantees that allow service adjustments or credits if speeds don’t meet the contract.
Keep all confirmation numbers, appointment dates, and account numbers from this process for at least six months. These records protect you if billing disputes arise.
Ready for a clear next step?
If coordinating utility setup alongside your move feels overwhelming, professional moving coordinators can manage these calls and timelines on your behalf, ensuring service is active when you arrive rather than tracking delays afterward.
Next steps for post move utility setup checklist electricity gas internet
Utility setup requires coordination between multiple providers with staggered timelines, so calling all three on the same day—even though installation dates differ—prevents delays from cascading. The gap between contacting a provider and service activation is typically five to ten business days, making early action your only control over when utilities are live. Renting introduces landlord coordination; owning requires you to manage every utility independently.
Related: condo and apartment moves.
Related: same-day moving in Toronto.
Related: King City.
Next steps for post-move utility setup checklist
Utility setup requires coordination between multiple providers with staggered timelines, so calling all three on the same day—even though installation dates differ—prevents delays from cascading. The gap between contacting a provider and service activation is typically five to ten business days, making early action your only control over when utilities are live. Renting introduces landlord coordination; owning requires you to manage every utility independently.
FAQ
What's the most important utility to set up first after moving?
Electricity is the priority. Contact your local electricity distributor (usually Hydro One in Ontario) on your first day—power is essential for everything else, from lights to appliances to charging devices. The process typically takes three to five business days, so starting immediately matters.
How long does it take to set up gas service after moving?
Gas service takes longer than electricity because a technician must visit to inspect and activate the meter for safety reasons. Call within 24 hours, but expect the appointment to be scheduled three to seven business days later. You cannot use gas appliances until the meter is officially activated.
Can I install internet before electricity and gas are set up?
Technically yes, but it's inefficient. Contact all three providers on the same day your move in, even though installation timelines are staggered. This prevents one delay from cascading into the others. Internet typically takes five to ten business days, so staggering calls ensures nothing gets missed.
What information do I need ready before calling utility providers?
Have your new address (exactly as it appears on your lease or deed), the move-in date, your phone number, the previous account holder's name, and your social insurance number for new accounts. For condos, also have your unit number and building manager contact information ready.
Who is responsible for utilities if I'm renting?
Renters must verify which utilities are included in the lease before signing. In Ontario, landlords must provide essential services like heat and water, but may require tenants to pay for gas, internet, and cable. Get written confirmation of your responsibility and what the previous tenant paid.
What should I do if a utility provider misses an appointment?
Call immediately and ask to speak with a manager rather than booking another appointment passively. Utility companies have penalties for missed appointments and may credit your account. Document the missed appointment and ask for compensation explicitly.

